5
Quick Start
–continued
Figure R.3
Figure R.1
Tilt
Grasp both sides of the monitor screen with
your hands and adjust the tilt as desired
(
Figure TS.1
)
.
Remove Monitor Stand for Mounting
To prepare the monitor for alternate mounting
purposes:
1. Remove the connector cover and
the cable cover
(Figure R.1)
.
2. Disconnect all cables.
3. Place monitor face down on a
non-abrasive surface
(Figure R.2)
.
4. Remove the 4 screws
connecting the monitor to the
stand and lift off the stand
assembly
(Figure R.2)
.
The monitor is now ready for
mounting in an alternate
manner.
5. Connect the AC cord and signal cable to the back of the monitor
(Figure
R.3)
.
6. Reverse this process to reattach stand.
NOTE: Use only VESA-compatible alternative mounting method.
Figure TS.1
Figure R.2
Non-abrasive surface
LCD1545V.p65
01.12.3, 1:58 PM
5
Black
