Step 2
Make sure that your computer is set up for 1024x768 resolution.
Open the Display Properties window by following this mouse click sequence
(1, 2, 3, 4, & 5)
indicated
by the numbered arrows below.
Step 3
Repeat Step 1.
This will ensure that the monitor is auto-adjusted to the new resolution.
If you have questions regarding the setup of your MultiSync LCD monitor, please refer to the user’s
manual or contact your NEC Technical Support representative.
On the right side of the Display Properties window there is a box labeled
Display
area
. Make sure the
“Screen”
slide bar
(6)
is set to
1024x768
.
You may have to restart your computer for this change to take effect. After the restart,
double check the
Display Properties/Settings
window to make sure you are
now at
1024x768
.
(Proceed to Step 3.)
2
1
3
4
5
6
LCD1500
12/8/98, 4:41 PM
2
