English-6
Quick Start
To connect the LCD monitor to your system, follow these instructions:
NOTE:
Make sure to read “Recommended Use” (page 3) before installation.
1. Turn off the power of your computer.
2.
For a PC with DisplayPort output:
Connect the DisplayPort cable to the connector of the display card in your system
(
Figure A.1
).
For a PC or MAC with DVI digital output:
Connect the DVI signal cable to the connector of the display card in your system
(
Figure A.2
). Tighten all screws.
For a PC with HDMI output:
Connect the HDMI cable to the connector of the display card in your system (
Figure A.3
).
For a PC with Analog output:
Connect a 15-pin mini D-SUB signal cable to the connector of the display card in your
system (
Figure A.4
).
For a MAC:
Connect a Macintosh cable adapter (not included) to the computer, then attach the 15-pin mini D-SUB signal
cable to the Macintosh cable adapter (
Figure A.5
).
NOTE:
Some Macintosh systems do not require any Macintosh cable adapter.
Figure A.1
Figure A.3
Figure A.2
DisplayPort cable
DVI cable*
1
HDMI cable (not included)
Figure A.4
Figure A.5
15-pin mini D-SUB cable (not included)
Macintosh Cable Adapter (not included)
Macintosh Cable Adapter (not included)
NOTE:
1. When removing the DisplayPort cable, hold down the top button to release the lock.
2. Please use a High Speed HDMI cable with HDMI logo.
*
1
The type and number of cables included will depend on the where the LCD monitor is to be shipped.