English-6
Quick Start
To attach the MultiSync LCD monitor to your system, follow these instructions:
1. Turn off the power to your computer.
2.
For the PC or MAC with DVI digital output:
Connect the DVI signal cable to the connector of the display card in your
system (
Figure A.1
). Tighten all screws.
For the PC with Analog output:
Connect the 15-pin mini D-SUB signal cable to the connector of the display card in your
system (
Figure A.2
). Tighten all screws.
For the MAC:
Connect the Macintosh cable adapter to the computer, then attach the 15-pin mini D-SUB signal cable to
the Macintosh cable adapter (
Figure B.1
). Tighten all screws.
Figure A.1
Figure B.1
Macintosh
Cable Adapter
(not included)
Figure A.2
DVI signal cable
Figure C.1a
A Type
B Type
A Type
B Type
NOTE:
Some Macintosh systems do not require a Macintosh cable adapter.
3. Place hands on each side of the monitor to tilt the LCD panel 30-degree angle and lift up to the highest position
(
Figure C.1
).
4. Connect all cables to the appropriate connectors (
Figure C.1
). Connect the Headphone (not included) to the appropriate
connector at the left side of the monitor (
Figure C.1
). When using the USB cable, connect the B type connector to the
USB upstream port on the right back side of the monitor and the A type connector to the downstream port on the computer
(
Figure C.1a
). If you can use the cord from the USB device, use one of the downstream ports on the side of the monitor.
Highest
Stand
Position
30˚ Tilt
Figure C.1
Power Cord
D-Sub
DVI
DVI Cable
Headphone
USB
Audio Input
