background image

English-19

English

Manufacturer’s Recycling and Energy Information

NEC DISPLAY SOLUTIONS is strongly committed to environmental protection and sees recycling as one of the company’s 
top priorities in trying to minimize the burden placed on the environment. We are engaged in developing environmentally-
friendly products, and always strive to help define and comply with the latest independent standards from agencies such as 
ISO (International Organisation for Standardization) and TCO (Swedish Trades Union).

Disposing of your old NEC product

The aim of recycling is to gain an environmental benefit by means of re-use, upgrading, reconditioning or reclamation of 
material. Dedicated recycling sites ensure that environmentally harmful components are properly handled and securely 
disposed. To ensure the best recycling of our products, 

NEC DISPLAY SOLUTIONS offers a variety of recycling procedures

 

and gives advice on how to handle the product in an environmentally sensitive way, once it has reached the end of its life.

All required information concerning the disposal of the product and country-specific information on recycling facilities can be 
found on our following websites:

http://www.nec-display-solutions.com/greencompany/

 (in Europe),

https://www.nec-display.com

 (in Japan) or

http://www.necdisplay.com

 (in USA).

Energy Saving

This monitor features an advanced energy saving capability. When a Display Power Management signal is sent to the monitor, 
the Energy Saving mode is activated. The monitor enters a single Energy Saving mode.

Mode

Power consumption

LED color

Maximum Operation

26 W

Blue

Normal Operation

16 W Default setting

Blue

Energy Saving Mode

0.26 W

Amber

Off Mode

0.24 W

Unlit

For additional information visit:

http://www.necdisplay.com/ 

(in USA)

http://www.nec-display-solutions.com/ 

(in Europe)

https://www.nec-display.com/global/index.html 

(Global)

For Energy Saving information:

For ErP requirement:
 

Setting: None.

 

Power consumption: 0.5 W or less.

 

Time for power management function: Approx. 1 min.

For ErP (Network standby) requirement:
 

Setting: None.

 

Power consumption: 0.5 W or less (with 1 port activating) / 3.0 W or less (with all ports activating).

 

Time for power management function: Approx. 1 min.

WEEE Mark (European Directive 2012/19/EU and amendments)

 

Disposing of your used product: In the European Union

EU-wide legislation as implemented in each Member State requires that used electrical and electronic products 
carrying the mark (left) must be disposed of separately from normal household waste. This includes monitors 
and electrical accessories, such as signal cables or power cords. When you dispose of such products, please 
follow the guidance of your local authority or ask the shop where you purchased the product, or if applicable, 
follow applicable legislation or agreement you may have. The mark on electrical and electronic products may 
only apply to the current European Union Member States.

Outside the European Union

If you wish to dispose of used electrical and electronic products outside the European Union, please contact your local authority 
and ask for the correct method of disposal.

Summary of Contents for MultiSync E271N






















Reviews: