English-6
Figure M.1
Remove Monitor Stand for Mounting
To prepare the monitor for alternate mounting purposes:
1. Place hands on each side of the monitor to tilt the LCD panel 5 degrees angles.
Remove the cable cover (
Figure M.1
).
Remove the connector cover (
Figure M.2
).
2. Disconnect all cables.
3. Place monitor face down on a non-abrasive surface (
Figure M.3
).
4. Remove the 2 screws connecting the stand to the monitor (
Figure M.3
).
Tilt and Swivel
Grasp both sides of the monitor screen with your hands and adjust the tilt and swivel as desired (
Figure TS.1
).
NOTE:
Handle with care when tilting and swivelling the monitor screen.
Figure TS.1
Figure M.2
MENU/EXIT
SELECT/1–2 RESET/DV
MODE
Figure M.3
