Single Docking Station EX
Single Docking Station EX Part Names
The names and functions of Single Docking Station EX parts are described below.
(1) Insertion port
(9) Stand
(3) Connecting detection lamp
(2) Power lamp
(8) LAN port
(7) USB connector
(5) Power switch
(6) AC adapter connector
(4) Connection terminal
(1) Insertion port
Insert Mobile Terminal EX into the port.
CAUTION
Do not insert any device other than Mobile Terminal EX into the port.
Failure to follow it may cause electric shock, fire or fault to occur.
(2) Power lamp
Goes on if the power is turned on.
(3) Connecting detection lamp
Lights while Mobile Terminal EX is inserted to the insertion port.
(4) Connection terminal
Used for charging or communication of Mobile Terminal EX.
(5) Power switch
Used to turn on or off the power of Mobile Terminal EX.
(6) AC adapter connector
Used to connect Mobile Terminal EX with the AC adapter.
(7) USB connector
Used to connect Mobile Terminal EX with a USB device.
Put the USB connector cap on the USB connector if not used.
(8) LAN port
Used to connect Mobile Terminal EX with the LAN.
Put the LAN port cap on the LAN port if not used.
(9) Stand
Allows the tilt of the station to be adjusted.
-
18
-
