background image

2

Your new NEC Display display box* should contain the following:

• MD21GS-2MP Display with tilt/swivel/pivot/height adjustable stand
• Power Cords (N.A. Hospital Grade, European Continental and Chinese)

*2

• Quick Reference Guide
• Installation and Maintenance Guide
• Video Signal Cable (DVI-D to DVI-D cable)
• CD-ROM (GammaComp MD)
• Ferrite Core x 2
• Sensor Hook

For complete display card instructions, please refer to the display card installation guide.
For GammaComp MD Quality Control Software, please refer to GammaComp MD User’s Guide.

* Remember to save your original box and packing material to transport or ship the display.

*2

 For Japanese market model, only power cord for Japan is provided with this display

.

*3 

For Power Cord (European continental and Chinese type)

Contents

Power Cords

Video Signal Cable

Quick Reference Guide

Installation & Maintenance Guide

CD-ROM

*3

*3

Ferrite Core x 2

Open the ferrite core and damp
it on the power cord.

Close the ferrite core.

Attach the Ferrite Core to the end of Power cord.
Only AC-IN (connector) side of display.

Ferrite Core

Ferrite Core

Sensor Hook

01_MD21GS2MPINSTALL_EN.P65

14/10/2004, 22:33

2

Summary of Contents for MD21GS-2MP-BK-BB











Reviews: