background image

English-4

Intended Use

The MD215MG grayscale display is intended to be used for displaying and viewing of digital images for diagnosis, including 
digital mammography, by trained physicians.

Caution: 

The MD215MG grayscale display cannot be used for a life-support system.

 

This device is designed as component of a fi nal system which is in compliance to IEC60601-1-1 requirements.

Safety Precautions

This device is designed for exclusive interconnection with IEC60601-1 certifi ed equipment outside of patient vicinity.

•  Equipment connected to digital interfaces must comply with the respective IEC standards (e.g. IEC 60950 for data processing 

equipment and IEC 60601-1 for medical equipment). 

•  This device complies with EN60601-1-2. To minimize the interference from other equipment, a minimum 0.5 m distance shall 

be kept form other potential electromagnetic sources, such as a Cell Phone. 

•  To reduce the risk of electric shock, make sure that the power cord is unplugged from wall socket. To fully disengage the 

power to the unit, please disconnect the power cord from the AC outlet. Do not open the back cover or AC adapter. No user 
serviceable parts inside. Refer servicing to qualifi ed service personnel. The AC outlet shall be readily available and accessible.

North America Customers

Grounding reliability can only be achieved when the equipment is connected to an equivalent receptacle, marked “Hospital Only” 
or “Hospital Grade”. That signal input port need to be connected properly and that any unused signal input port shall not be 
accessible for the patient to contact in the patient area after the LCD is integrated into a medical system.
Federal law restricts this device to sale by or on the order of a licensed healthcare practitioner.

European Customers

Unpacking, Installation and calibration of this display should only be done by authorized and trained personnel. Any installation 
done by a non-authorized person is done under his own risk and we accept no responsibility in any device malfunctioning. To 
secure full functionality of this display, only NEC approved display controller models for connection with the fi nal system must be 
used.

Medical Imaging

MD215MG is designed for 2048 x 2560 medical imaging.

Summary of Contents for MD215MG






















Reviews: