6
Connection via a network
Information
・
Before connecting an external device via a network, check with the network administrator.
・
Some models cannot receive commands in standby mode. See Appendix "Standby Mode setting for receiving
commands".
Connection using a wired LAN
This method connects a PC and the projector using a LAN cable. For information about the type of LAN cable to be
used (straight or cross), contact the network administrator. The pin assignment of the LAN port is shown below.
<LAN port (RJ-45 8-pin connector)>
Pin number
Function
Description
1
TD+
Transmit Data (+)
2
TD-
Transmit Data (-)
3
RD+
Receive Data (+)
4
－
Not used
5
－
Not used
6
RD-
Receive Data (-)
7
－
Not used
8
－
Not used
Connection using a wireless LAN
This method connects a PC via a wireless LAN by connecting a wireless LAN unit to the projector. For information
about the available wireless LAN units, see the operation manual of the model in use.