NEC M282X, User Manual

Page: 16 / 163

5
1. Introduction
❸
Part Names of the Projector
Front/Top
[M402W/M362W/M322W/M402X/M362X/M322X/M282X]
Controls
(
→
page 8 )
Remote Sensor
(
→
page 11 )
Exhaust Vent
Heated air is exhausted from here.
Port Cover for Optional USB
Wireless LAN Unit
When using the optional USB
Wireless LAN Unit, first remove
the cover. (
→
page 129 )
Zoom Lever (
→
page 22 )
Lens Cover
Focus Ring
(
→
page 23 )
Adjustable Tilt Foot Lever
(
→
page 21 )
Adjustable Tilt Foot
(
→
page 21 )
Lens
Light Sensor
(
→
page 95 )
Security chain opening
Attach an anti-theft device.
The security chain opening accepts
security wires or chains up to 0.18
inch/4.6 mm in diameter.
Opening and closing the lens cover
Slide the lens cover to the right to uncover the lens.
To cover the lens, slide the lens cover to the left.
NOTE:
• The lens cover works in conjunction with the AV-MUTE function. Closing the lens cover will turn off the image and sound during
normal projector operation; opening it will restore the image and sound.
With the lens cover closed the image and sound is turned off, however the lamp is still lit. If the projector stays this way for about
2 hours, it will turn off automatically.
• Do not pull the lens cover with excessive force or apply strong pressure in either the up or down direction. Doing so can cause
damage to the lens cover sliding mechanism!