background image

14

Additional features

S

a

fe

ty

P

re

ca

u

ti

o

n

s

C

ar

e

an

d

M

ai

n

te

n

an

ce

Tr

o

u

b

le

sh

o

o

ti

n

g

Ti

p

s

O

p

e

ra

ti

n

g

In

st

ru

ct

io

n

s

Sleep Mode

Press the Sleep Mode Auto button to
set the time you want the unit to turn off
automatically.

To cancel the Sleep Mode, press the sleep
Mode Auto button several times until the star
(      ) disappears from the operation display.

NOTE: 

The Sleep Mode will be operated at

low fan speed (cooling) or medium fan speed
(heat pump only) for quiet sleeping.

IN COOLING MODEThe temperature will
automatically rise by 1°C over the next 30
minutes and by 2°C in 1 hour for comfortable
sleeping.

Make sure the Sleep Mode Auto LED
lights up.

The Timer is programmed in one-hour
increments by pressing the Sleep Mode Auto
button 1 to 7 times.
The sleep mode is available for 1 to 7 times.
To alter the time period in steps of 1 hour,
press the Sleep Mode Button while aiming at
air conditioner.

Setting the Time

Press the Start/Stop button.

Time can be set only when you have pressed
the Reset button. If you have just replaced the
batteries, the Reset button should be pressed
to reset the time.

Press the Time Setting buttons until
the desired time is set.

To cancel the setting the timer.

Press the Timer Cancel
button while aiming remote
control at the signal receptor.
(The timer lamp on the air
conditioner and the display
will go out.)

SET

Delay Start/Pre-Set Stop

Make sure the time is set correctly on the
remote control display.

Press the ON/OFF Timer
buttons to turn Timer on
or off.

Press the Time Setting buttons until the
desired time is set.

Press the selected on/off
setting by pressing the
Timer SET button while
aiming the remote control at
the signal receptor.

Summary of Contents for LS-D1822CL























Reviews: