NEC LL009F, User Manual, Page: 109 / 123

- 109 -
6.2 Cartridge label
If a bar code label is not attached, it is recommended that a label be attached, such as shown
in Figure 6-2 below, so that descriptions and dates of files backed up to the data cartridge can
be recorded for easy reference.
Figure 6-2 Label Attachment Area
Note the following precautions concerning labels to be attached.
•
The labels used for descriptions of data cartridge contents should be easy to peel off and
should not leave any adhesive residue on the label attachment area after being removed.
•
When changing descriptions on labels, do not use an eraser. Instead, replace the label
(Index labels are included in the data cartridges).
•
When attaching labels, attach them precisely and firmly in the attachment area. When
replacing a label, remove the old label before attaching a new one.
•
When using labels other than the supplied index labels, select labels that do not leave any
adhesive residue and are the correct size.
Label attachment area