NEC LCD2490W2-BK-SV - MultiSync - 24" LCD Monitor User Manual Download Page 8

Page: 8 / 52

| SPECTRAVIEW II - USER’S GUIDE

System Requirements

SpectraView has the following system requirements:

Mac OS

Microsoft Windows

Operating System

Apple Mac OS X v10.3.9 or higher.

Mac OS 10.5.2 or higher required for

some Mac models. See README file

for details.

Microsoft Windows 2000, XP, XP x64,

Server 2003, Vista and Vista x64, Windows

7 and Windows 7 x64.

Video Graphics Adapter

All Apple standard video graphics

cards,

including

most

newer

PowerBooks. Digital (DVI) output is

highly recommended.
See the README file and NEC website

for the latest information on Macs with

DisplayPort video output.

Most recent ATI, Nvidia, Matrox, S3

Graphics, and Intel graphics adapters.

Digital (DVI) output is highly recommended.

See README file for details.

Video Color Depth

At least 24 bit color (Millions of colors). At least 24 bit color.

Video Resolution

Displays native resolution highly

recommended (1280x1024, 1600x1200,

1680x1050, 1920x1080, 1920x1200,

2560x1440 or 2560x1600 depending

on monitor)

Displays

native

resolution

highly

recommended (1280x1024, 1600x1200,

1680x1050, 1920x1080, 1920x1200,

2560x1440 or 2560x1600 depending on

monitor)

Supported Color

Sensors

GretagMacbeth Eye-One Display V1
X-Rite/GretagMacbeth Eye-One Display

X-Rite/GretagMacbeth Eye-One Monitor,

Eye-One Pro.

X-Rite ColorMunki.
Monaco OptixXR (X-Rite DTP 94).
ColorVision/Datacolor Spyder 2.
Datacolor Spyder 3.

•
•

•

•
•
•
•

GretagMacbeth Eye-One Display V1
X-Rite/GretagMacbeth Eye-One Display V2
X-Rite/GretagMacbeth Eye-One Monitor,

Eye-One Pro.

X-Rite ColorMunki.
Monaco OptixXR (X-Rite DTP 94).
ColorVision/Datacolor Spyder 2.
Datacolor Spyder 3.

•
•
•

•
•
•
•

USB

At least one available USB port for

Color Sensor.

At least one available USB port for Color

Sensor.

Summary of Contents for LCD2490W2-BK-SV - MultiSync - 24" LCD Monitor




















































Search results

Summary of Contents for LCD2490W2-BK-SV - MultiSync - 24" LCD Monitor

Reviews:

Related manuals for LCD2490W2-BK-SV - MultiSync - 24" LCD Monitor

Brands by name

Popular brands

NEC LCD2490W2-BK-SV - MultiSync - 24" LCD Monitor, User Manual

Search results

Summary of Contents for LCD2490W2-BK-SV - MultiSync - 24" LCD Monitor

Reviews:

Related manuals for LCD2490W2-BK-SV - MultiSync - 24" LCD Monitor

Brands by name

Popular brands