The displays’ Eco-Mode further helps conserve
energy by allowing you to defi ne a setting for
the backlight at a 50 or 75% brightness level.
This feature’s benefi ts are best utilized in larger
corporate environments where many displays
are employed.
Achieve consistent, long-distance signals.
The MultiSync 90 Series’ CableComp™ lets you
realize the advantages of long analog or digital
monitor cable lengths without the diffi culties
and costs normally associated with this type of
confi guration. This technology uses a digitized
signal delay circuit to automatically compensate
for each red, green and blue cable’s length and
video signal delay, ensuring sharp image repro-
duction. CableComp also boosts the video signal
to prevent blurred images without the need for
costly repeaters. In environments such as trading
fl oors and call centers, longer cables enable
systems to be centrally located in control rooms
far away from users (up to 326 feet/100 meters
[analog]; 90 feet/30 meters [digital]), allowing
monitor upgrades, service and repairs to be
accomplished without interrupting the work
environment.
Wide compatibility for today and tomorrow.
Ambix
3
™ technology provides the widest range of
computer video compatibilities between analog
and digital systems by allowing the same monitor
to work seamlessly in any technical environment.
The DVI-I connector provides digital or analog
input, the DVI-D connector provides digital-only
input, and a third input is provided with a
traditional 15-pin VGA connector, which allows
for legacy analog-only connection. Ambix
3
provides the ability to toggle between all three
inputs, reducing the expense of external
monitor switches. This triple-interface architecture
provides a number of single-, dual- or triple-input
confi gurations.
Hassle-free display setup.
With Advanced No
Touch Auto Adjust™, MultiSync 90 Series
monitors not only provide for an optimal image
upon initial power-on but can also detect
closed signal changes even if they run under the
same resolution and refresh rate, as is the
case with external signal switch boxes. This results
in a more stable image after switching. These
models also feature auto DVI cable detection,
which, upon power-up of your computer system,
allows it to identify which signal cable (analog
or digital) is attached to the monitor’s DVI-I
connector. This technology eliminates many
manual setup steps and assures that your
system and monitor confi guration are achieving
optimal performance.
Enhanced pro-level screen performance.
With
X™ wide-angle viewing technology you
can enjoy fl exible horizontal and vertical viewing
angles up to 178°(89° up, down, left and right)
with minimal color shift and less glare, refl ection
and distortion. Less off-angle color shift results
in less image degradation and, in environments
where data may be viewed by multiple users, this
enhanced feature proves to be a winning solution.
NEC’s Rapid Response™ technology with
overdrive provides for uninterrupted display of
full-motion video with response times as quick
as 16ms. The overdrive function improves the
critical gray-to-gray response time, reducing
pixel lag and enhancing the video experience.
This feature has been developed specifi cally for
50 Hz broadcast video sources as it guarantees
smooth representation of moving images. Rapid
Motion™, a technology strictly for viewing moving
video, DVD movies or MPEG fi les, bypasses frame
memory altogether for smooth-fl owing video
reproduction without ghosting or digital artifacts.
Overall, this remarkably quick motion makes
these models better than ever for animation,
game development and video applications such
as presentations and streaming web video.
Environmental friendliness and intelligent
power management ensure a smart investment.
MultiSync 90 Series displays were developed using
materials that not only meet strict environmental
standards but make it easier for you to recycle
the product at the end of its lifecycle. The displays’
RoHS compliancy ensures that they are free of
hazardous chemicals such as lead, hex-chrome,
cadmium, PBDE and PBB, with reduced mercury.
They also meet Waste Electrical and Electronic
Equipment (WEEE) regulations, a directive that
controls the disposal of equipment and the
percentage going to landfi lls.
The MultiSync 90 Series meets or exceeds the
EPA’s Energy Star
®
4.0 Tier 2 standard for energy
consumption, allowing you to conserve power and
lower your total cost of ownership. Many tech-
nologies contribute to these savings, including the
real-time clock with power management sched-
uler, which can be set from 1-24 hours x 7 days
via the on-screen display. If users forget to turn
off their monitors, this function will turn them
off automatically after a user-determined period
of time, thereby reducing electrical power costs.
The high-effi ciency backlight, which provides
the longest lifetimes of any NEC LCD monitor
family, reduces not only the power consumption
but also the heat generation at the front of
the screen.
Gain greater control.
Our exclusive NaViSet™
software (available by download) offers an
intuitive graphical user interface that allows
you to adjust On Screen Manager (OSM
®
) display
settings via mouse and keyboard instead of using
the monitor’s up-front buttons. This software
provides animated graphics and test patterns to
help guide you through adjustments.
For an unprecedented level of control, NaViSet
Administrator software for IT professionals
(available upon request) contains Windows
Management Instrumentation™ (WMI) for remote
control and diagnostics maintenance for all
installed MultiSync 90 Series units. This software
provides IT personnel remote access to the
monitor and its settings without disrupting
the user.
All of these control capabilities are made possible
using the improved remote diagnostics and
remote control capabilities of the Display Data
Channel/Command Interface (DDC/CI). This allows
control commands to be sent directly to the
monitor by the local system or remotely over an
existing network (LAN) by a system administrator.
In order to take full advantage of these benefi ts,
users must use a DDC/CI-compatible graphics
card and be running Windows 2000/XP.
DDC/CI also enables self-diagnostics for MultiSync
90 Series displays, helping keep administrators
aware of possible abnormalities such as lamp
and circuit block failures, input signal status
and temperatures on the inside of the cabinet.
When the display detects a problem, the LED
on the front of the bezel fl ashes in a pattern of
long and short blinks, depending on the type of
abnormality. The diagnosis information also can
be accessed via NaViSet.
These displays support asset management
capability by adhering to VESA DDC and
EDID standards. Based on these standards,
information from the monitors such as serial
number, model name and date of manufacture
can be communicated to a central system
using asset management software such
as Microsoft’s System Management Server.
