16
Monitor
MultiSync
®
LCD
1770NXM
Notes
Specifications
Monitor
LCD Module
Diagonal :
17.0 inch
Active matrix; thin film transistor (TFT)
Viewable Image Size :
17.0 inch
liquid crystal display (LCD); 0.264 mm dot
Native Resolution (Pixel Count) :
1280 x 1024
pitch; 250cd/m
2
white luminence;
500:1 contrast ratio, typical
Input Signal
Video :
ANALOG 0.7 Vp-p/75 Ohms
Digital Input: DVI
Sync :
Separate sync. TTL Level
Horizontal sync. Positive/Negative
Vertical sync. Positive/Negative
Display Colors
16,194,277
Dependent on display card used.
Maximum
Left/Right :
80
°
/80
°
(CR>5)
Viewing Angles
Up/Down :
85
°
/75
°
(CR>5)
Synchronization
Horizontal :
31.5 kHz to 81.0 kHz (Analog)
Automatically
Range
31.5 kHz to 69.0 kHz (Digital)
Automatically
Vertical :
56.0 Hz to 75.0 Hz
Automatically
Resolutions Supported
720 x 400*
1
:VGA text
Some systems may not support all modes listed.
640 x 480*
1
@ 60 Hz to 75 Hz
800 x 600*
1
@ 56 Hz to 75 Hz
832 x 624*
1
@ 75 Hz
1024 x 768*
1
@ 60 Hz to 75 Hz
1152 x 870*
1
@ 75 Hz
1280 x 1024 @ 60 Hz to 75 Hz (Analog) ......... NEC-Mitsubishi Electronics Display cites
1280 x 1024 @ 60 Hz (Digital)
recommended resolution at 60 Hz for
optimal display performance.
Active Display Area
Horizontal :
337.9 mm/13.3 inches
Vertical :
270.3 mm/10.6 inches
USB Hub
I/P:
USB Specification Revision 2.0
Port:
Upstream 1
Downstream 4
Load Current:
Maximum 0.5A per port
Speakers
Practical Audio Output:
2.0 W + 2.0 W
Power Supply
100 – 240 V ~ 50/60 Hz
Current Rating
1.12
–
0.56
A
Dimensions
367.0 mm (W) x 368.6-472.5 mm (H) x 198.0 mm (D)
14.4 inches (W) x 14.5-18.6 inches (H) x 7.8 inches (D)
Weight
6.5 kg
14.3 lbs
Environmental Considerations
Operating Temperature :
5
°
C to 35
°
C/41
°
F to 95
°
F
Humidity :
30% to 80%
Feet :
0 to 10,000 Feet
Storage Temperature :
-10
°
C to 60
°
C/14
°
F to 140
°
F
Humidity :
10% to 85%
Feet :
0 to 30,000 Feet
*
1
Interpolated Resolutions: When resolutions are shown that are lower than the pixel count of the LCD module, text may appear different. This is
normal and necessary for all current flat panel technologies when displaying non-native resolutions full screen. In flat panel technologies, each
dot on the screen is actually one pixel, so to expand resolutions to full screen, an interpolation of the resolution must be done.
NOTE: Technical specifications are subject to change without notice.
Specifications
–continued
LCD17PISAManual080604.p65
8/6/04, 5:15 PM
16
