7
Quick Start
–continued
Remove Monitor Stand for Mounting
To prepare the monitor for alternate mounting purposes:
1. Disconnect all cables.
2. Place hands on each side of the monitor and lift
up to the highest position.
3. Place monitor face down on a non-abrasive surface (
Figure S.1
).
4. Remove the hinge cover (
Figure R.1
and
Figure R.2
).
5. Remove the 4 screws connecting the monitor to the stand and lift off the
stand assembly (
Figure R.3
) the monitor is now ready for mounting in an
alternate manner.
6. Connect the AC cord, signal cable and audio cable to the back of the
monitor (
Figure R.4
).
7. Reverse this process to reattach stand.
NOTE:
Use only VESA-compatible alternative mounting method.
Handle with care when removing stand.
Figure R.1
Figure R.2
Figure R.3
Figure R.4
Figure S.1
LCD1760VM0527.p65
6/2/03, 11:21 AM
7
