![background image](http://html.mh-extra.com/html/nec/lcd1711m/lcd1711m_user-manual_249689009.webp)
Connecting the Display (Figure 8.1)
To set up this display, please refer to the following figure and procedures.
1. Be sure all equipments are off.
2. Connect the DC power cord to the power connector; plug one end of the
AC power cord into the power adapter, and then the other end into an
electrical outlet (1).
3. Connect the VGA signal cable from display VGA input connector to the
15-pin connector of your host computer and tighten the screws (2).
4. Connect the Audio-In cable from audio input port of your display to the
Audio-out port of your computer (3).
5. Turn on your computer and display.
LCD1711M – 8
Notice:
To ensure the LCD display can work well with your computer,
please configure the display mode of your graphic card to make it
less than or equal to 1280 x 1024 resolution and make sure
timing of the display mode is compatible with the LCD display.
We have listed the "Compatibility Modes" of this LCD display in
appendices for your reference.
Start Your Installation
English
Summary of Contents for LCD1711M
Page 1: ...LCD1711M User s Manual Bedienerhandbuch Manual del usuario Manuel Utilisateur Manuale utente ...
Page 10: ...9 User s Manual Figure 8 1 English 1 Power Adapter Power Cord 2 VGA Cable 3 Audio In cable ...
Page 26: ...Abbildung 8 1 25 Bedienerhandbuch Deutsch 1 Netzteil Netzkabel 2 VGA Kabel 3 Audio Eingang ...
Page 88: ...Printed on recycling paper Printed in China 36 59307 001 Rev A ...