English-2
Quick Start
To attach the MultiSync FE950+ monitor to your system, follow these
instructions:
1. Turn off the power to your computer.
2. If necessary, install the display card into your system. For more
information, refer to the display card manual.
3.
For the PC:
Connect the 15-pin mini D-SUB of the captive signal
cable to the connector of the display card in your system
(
Figure A.1
). Tighten all screws.
For the Mac:
Connect the Macintosh cable adapter (not included) to
the monitor connector on the Macintosh (
Figure B.1
). Attach the
15-pin mini D-SUB end of the captive signal cable to the Macintosh
cable adapter on the computer (
Figure B.1
). Tighten all screws.
4. The Windows
®
95/98/2000 INF file for your MultiSync monitor can be
found on the CD-ROM, delivered with the monitor.
5. Connect one end of the power cord to the MultiSync FE950+ monitor
and the other end to the power outlet (
Figure C.1
).
6. Turn on the monitor (
Figure D.1
) and the computer.
NOTE:
If you have any problems, please refer to the
Troubleshooting
section of this User’s Manual.
Captive Signal Cable
15-pin mini D-SUB
Figure A.1
Summary of Contents for LCD1525M - MultiSync - 15" LCD Monitor
