background image

English-4

Quick Start

To attach the MultiSync LCD monitor to your system, follow these instructions:

1. Turn off the power to your computer.

2.

For the PC or MAC with DVI digital output:

 Connect the DVI signal cable to the connector of the display card in your

system (

Figure A.1

). Tighten all screws.

For the PC with Analog output:

 Connect the 15-pin mini D-SUB signal cable to the connector of the display card in your

system (

Figure A.2

). Tighten all screws.

For the MAC:

 Connect the Macintosh cable adapter to the computer, then attach the 15-pin mini D-SUB signal cable to

the Macintosh cable adapter (

Figure B.1

). Tighten all screws.

NOTE:

Some Macintosh systems do not require a Macintosh cable adapter.

3. Place hands on each side of the monitor to tilt the LCD panel 30-degree angle and lift up to the highest position (

Figure C.1

).

4. Connect all cables to the appropriate connectors (

Figure C.1

).

NOTE:

If connecting both DVI and D-sub cable, the DVI cable must be connected along side the rib on the power cord side
(

Figure C.1

).

5. For successful cable management, place the cables in this order into the cable management: Power cord and DVI cable

(

Figure C.2

).

6. Place DVI cable and power cord into the specific hooks indicated in 

Figure C.2

.

7. Place the D-Sub and the USB cable into the specific hooks indicated in 

Figure C.2 

(USB Cable: NX model only).

Figure A.1

Figure B.1

Macintosh
Cable Adapter
(not included)

Figure A.2

DVI signal cable

Highest
Stand
Position

30˚ Tilt

D-SUB Cable

Power Cord

Figure C.1

(Picture: LCD2070NX model)

Figure C.2

(Picture: LCD2070NX model)

USB Cable

(NX model only)

DVI Cable

Power Cord

DC-OUT

USB
(NX model only)

Input1 (DVI)

Input2 (D-Sub)

DVI Cable

Summary of Contents for L204FY




















Reviews: