Issue 1
NEC America, Inc.
4 - 4
InfoSet 408 System Manager’s Guide
To redirect a new message:
1.
Listen to the message long enough to determine who it is for.
2.
Press 2 to interrupt the message.
3.
When the system asks if you would like to redirect the message,
press 1 for Yes, and then enter the appropriate mailbox as
prompted.
4.
Press 1 to confirm.
5.
If needed, record an introduction when prompted.
To redirect an old message:
1.
When the system says, “You have <number> messages to review.
Would you like to check them?” Press 1 for Yes.
2.
Listen to the message long enough to determine who it is for.
3.
Press 2 to interrupt the message.
4.
When the system asks if you would like to redirect the message,
press 1 for Yes, and then enter the appropriate mailbox as
prompted.
5.
Press 1 to confirm.
6.
If needed, record an introduction when prompted.
Transferring External Callers To A Voice Mailbox:
Your operator transfers external callers to subscribers’ voice mailboxes.
The operator’s procedure differs depending on whether easy message
access is enabled.
To transfer an external caller to a voice mailbox on systems not
using easy message access:
1.
Press the transfer key.
2.
Dial 50.
3.
When InfoSet 408 Voice Mail answers, dial the mailbox number you
want and then press 2 to place the caller directly into the voice
Summary of Contents for InfoSet 408 VM
Page 1: ... ...
Page 52: ...L L ...
