NEC IE-780338-NS-EM1 User Manual Download Page 6

Page: 6 / 47

User’s Manual U16214EJ1V0UM

Terminology

The meanings of certain terms used in this manual are listed below.

Term

Meaning

Emulation device

This is a general term that refers to the device in the emulator that is used to emulate the target

device. It includes the emulation CPU.

Emulation CPU

This is the CPU block in the emulator that is used to execute user-generated programs.

Target device

This is the device that is the target for emulation.

Target system

This includes the target program and the hardware provided by the user. When defined narrowly,

it includes only the hardware.

IE system

This refers to the combination of the IE-78K0-NS or IE-78K0-NS-A and the IE-780338-NS-EM1.

Conventions

Data significance: Higher digits on the left and lower digits on the right

Note

Footnote for item marked with

Note

in the text

Caution

Information requiring particular attention

Remark

Supplementary information

Related Documents

The related documents (user’s manuals) indicated in this publication may include

preliminary versions. However, preliminary versions are not marked as such.

Document Name

Document No.

IE-78K0-NS In-Circuit Emulator

U13731E

IE-78K0-NS-A In-Circuit Emulator

U14889E

IE-780338-NS-EM1 Emulation Board

This manual

ID78K Series Integrated Debugger Ver. 2.30 or Later Operation Windows™

Based

U15185E

PD780318, 780328, 780338 Subseries

U14701E

Caution

The documents listed above are subject to change without notice. Be sure to use the latest

documents when designing.

Summary of Contents for IE-780338-NS-EM1
















































Search results

Summary of Contents for IE-780338-NS-EM1

Reviews:

Related manuals for IE-780338-NS-EM1

Brands by name

Popular brands

NEC IE-780338-NS-EM1, User Manual

Search results

Summary of Contents for IE-780338-NS-EM1

Reviews:

Related manuals for IE-780338-NS-EM1

Brands by name

Popular brands