18
IE-703081-MC-EM1 User’s Manual
CHAPTER 5 RESTRICTIONS
5.1 DCAN
Set software debugger (ID850) as follows when using the DCAN function.
•
5 V to the VDD1 terminal (pin 115) from the target system before starting the software debugger.
•
Make the following settings.
(Memory mapping column of configuration panel)
Memory Attribute: Target
Mapping Address: nF0000H to nFFFFFH
After inputting the values, click the Add button.
5.2 WATCHDOG TIMER
Set software debugger (ID850) as follows when using the WATCHDOG TIMER function.
•
5 V to the VDD1 terminal (pin 115) from the target system before starting the software debugger.
•
Do not set a “reset mask” via the configuration panel of the software debugger.
