manualshive.com logo in svg

NEC FS-8002, Instruction Manual, Page: 16 / 36

Share
Download
NEC FS-8002 Instruction Manual Download Page 16

15

TO ADJUST THE SOUND BALANCE

Press the MENU button to select the
SOUND and then to be displayed on
right appearance.
Select the BALANCE with the
PR 

y

/

x

buttons.

Adjust the BALANCE with the  

C

/

B

buttons.
Press 

C

button to decrease the right

speaker volume and the 

B

button to 

decrease the left speaker volume.

TO ADJUST SOUND FREQUENCY

Press the MENU button to select the SOUND and then to be
displayed on the right appearance.
Select the sound frequency(120HZ,
500HZ, 1500HZ, 5000HZ, 10KHZ)
with the PR 

y

/

x

buttons. 

By pressing the  

C

/

B

buttons to

activate the sound frequency.

TO SELECT SOUND EFFECT

Press the SOUND EFFECT button at remote control to select sound
effect.
The display of  SURROUND, DYNAMIC, OFF change cyclically
whenever you press the SOUND EFFECT button.

Item

Pressing

C

B

120HZ

Decrease 120HZ

Increase 120HZ

500HZ

Decrease 500HZ

Increase 500HZ

1500HZ

Decrease 1500HZ

Increase 1500HZ

5000HZ

Decrease 5000HZ

Increase 5000HZ

10KHZ

Decrease 10KHZ

Increase 10HZ

DYNAMIC

MONO

- - : - -

SURROUND

MONO

- - : - -

OFF

MONO

- - : - -

Summary of Contents for FS-8002





































Reviews:

No comments