© NEC Corporation 2019 44
Install Cabinets for Bottom-Row on Power Bar
Use the grip handles on the cabinet (Figure
52, A) to bring it into position at left corner
on the Power bar.
Align together the Cabinet hanger pins with
the frame support sockets (B) and the Corner
alignment pins on the Power bar (C).
Lower the cabinet onto the Network-PS
socket (D), gently pressing it until it sits
firmly.
Notice
Place the cabinet carefully and straight on top of the
Network-PS socket. Otherwise, the data connection
may be pushed out and not function properly.
Figure 52: Installing the First Cabinet
Install further cabinets until the first row is
complete.
Figure 53: Installing Additional
Cabinets – First Row
Connect each cabinet to its adjacent cabinets
with the Cabinet interlocks.
Push in the lock bolt.
Turn the lock bolt 90° to lock.
Fix the black nut to secure the lock
finger tight.
Figure 54: Locking Two Modules
Notice
Do not tighten the Cabinet interlocks too much.
Otherwise the cabinets cannot be aligned later on.
C
A
B
D
b
a
c
A
C
B
D
