NEC Express5800/R120f-1E, System Configuration Manual, Page: 20 / 34

SYSTEM CONFIGURATION GUIDE
–
NEC Express5800R120f-1E
NEC Corporation Revision 6.0
– July 16, 2015
20
6 PCI Card
Please refer to Supported PCI Cards and Installable Slots with regard to the position of PCI slot which
can mount PCI card supported.
6.1 PCI Riser Card
Product Name / Description Part Number
PCIe Riser Card Kit
3 x PCIe 3.0 x8
(Standard)
PCIe x8 Riser Card Kit
4 x PCIe 3.0 x8
N8116-39
PCIe x16 Riser Card Kit
2 x PCIe 3.0 x16, 2 x PCIe 3.0 x8
N8116-33
NOTE:

N8116-33 PCIe x16 Riser Card Kit is supported in dual-processor configuration.
6.2 Network Interface Controller
Category Product Name / Description Part Number
LOM Card 1GbE Quad Port 1000BASE-T LOM Card
Broadcom® BCM5719
PCIe 2.0 x4
N8104-154F
10GbE Dual Port 10GBASE-T LOM Card
Intel Ethernet Controller X540
PCIe 2.0(x8)
N8104-155F
Dual Port 10G-SFP + Dual Port 1000BASE-T LOM Card
Qlogic NetXtreme II BCM57800S
PCIe 2.0 x8
NOTE :
- N8104-129 SFP+ Module is required to connect with an
optical cable.
- Up to two SFP+ Modules can be installed.
N8104-156F
Adapter 1GbE 1000BASE-T Adapter
Broadcom ® BCM5718 Gigabit Ethernet Controller
PCIe 2.0 x1
N8104-150
Dual Port 1000BASE-T Adapter
Broadcom ® BCM5718 Gigabit Ethernet Controller
PCIe 2.0 x1
N8104-151
Dual Port 1000BASE-T Adapter
Intel® 82580 Gigabit Ethernet Controller
PCIe 2.0 x4
NOTE :
- PXE boot is not supported on UEFI environment.
N8104-145
Quad Port 1000BASE-T Adapter
Broadcom ® BCM5719 Gigabit Ethernet Controller
PCIe 2.0 x4
NOTE :
- Network cables with RJ-45 plug covers cannot be used.
N8104-152
10GbE Dual Port 10GBASE SFP+ Adapter (SFP+/2ch)
Intel 82599ES 10 Gigabit Ethernet Controller
PCIe 2.0 x8, Low Profile / Full Height
NOTE :
- N8104-129 SFP+ Module is required to connect with an
optical cable.
- Up to 2 SFP+ Modules can be installed.
N8104-148