![background image](http://html.mh-extra.com/html/nec/express5800-180ra-7/express5800-180ra-7_user-manual_251232152.webp)
4-58
Upgrading Your System
Installing a DEU Power Supply
Use this procedure to install a power supply into the DEU.
1.
Observe the safety and ESD precautions listed at the beginning of this
chapter.
2.
Power off the system. Ensure the power cords are unplugged from the AC
wall outlet.
3.
Remove the two screws securing the blank cover of the power supply bay
where the additional power supply will be installed and remove the cover,
see Figure 4-64.
Note:
Save the blank cover removed from the additional
power supply bay for future use.
Figure 4-64. Removing the DEU Power Supply Bay Blank Cover
4.
Slide the new power supply into the bay, see Figure 4-65.
Figure 4-65. Installing the New Power supply
Summary of Contents for Express5800/180Ra-7
