Express5800/120Ra-1 System Release Notes 3
Introduction
These System Release Notes cover the following topics:
!
General Comments
!
Advisories
General Comments
The following general comments apply to this server.
!
Versions of the Network Operating Systems tested and recommended are:
Windows
®
2000
Windows NT
®
4.0 Server with Service Pack 6
Novell
®
NetWare
®
5.1
SCO OpenServer
™
5.05 with Maintenance Supplement 505A.
UNIXWare
®
7.1.1
Advisories
This section contains advisories on the EXPRESSBUILDER and system
documentation.
EXPRESSBUILDER
!
EXPRESSBUILDER EasySetup always configures the Windows 2000
TCP/IP Protocol IP settings to "Obtain an IP address automatically"
(DHCP), regardless of the IP address setting specified in EasySetup. If static
TCP/IP addressing is required, TCP/IP must be reconfigured. Refer to your
Windows 2000 documentation for instructions.
!
The Administrator Menu in the System Information Management segment
of the Offline Maintenance Utility is accessible only by NEC authorized
service representatives.
!
EXPRESSBUILDER operates in floppy emulation mode. The emulated
floppy drive portion of your system CD-ROM is designated Drive A and the
remaining portion(s) of the CD-ROM is designated Drive Q. Your system
diskette drive is Drive B. After creating the Off-line Maintenance Utility
diskette, EXPRESSBUILDER prompts you to remove the diskette from
Drive B. At this prompt, remove the diskette from your diskette drive.
