1. Setup Procedure
Express5800/R320d-E4, R320d-M4 Installation Guide (VMware 5.5)
27
Chapter 1 Installing OS
1.6
Setting HBA configuration by using QLogic
Important Before setting the HBA configuration by using QLogic BIOS, it is required to
complete the storage settings such as creating a logical disk.
1.
Start from the CPU/IO module 0, and then perform the following.
Important Make sure that the PRIMARY LED on CPU/IO module 0 is lit.
1-1
In the QLogic prompt window which appears during POST, press
Ctrl+Q
or
A
lt+
Q
to launch
QLogic Fast! UTIL.
1-2
Select “Configuration Settings”, and then press
Enter
.
