NEC ELECTRA ELITE IPK II, System Hardware Manual, Page: 431 / 642

Electra Elite IPK II Document Revision 3
System Hardware Manual 9 - 25
___________________________________________________________________________________
___________________________________________________________________________________
1. Prepare Multiline Terminal for adapter installation. Refer to
Section 2 Preparing Multiline Terminal for Adapter Installation
on page 9-1
.
2. Plug the tabs marked A and B into adapter slots, then snap the
tab on the other end of the adapter into the receptacle marked
C
. Refer to Figure 9-26 Attaching the CT(U)-R Unit to the
Multiline Terminal .
3. Replace the base plate (or wall mount unit) and attach the line
cord. Refer to
Section 3 Connecting a Multiline Terminal to the
System on page 8-15 .
Figure 9-26 Attaching the
CT(U)-R Unit
to the
Multiline Terminal