•
Dial
0 6
•
Enter value
o
0 - 5 sec
o
1 - 10 sec(*)
o
2 - 20 sec
o
3 - 30 sec
o
4 - 50 sec
o
5 - 60 sec
•
Press
MIC
to store the data
•
Press
SPKR
to go back on line
Note: (*) indicates default value
1-07 : Doorphone Display Time
This Memory Block area is used to enter the time during which
DOORPHONE 1
or
DOORPHONE 2
is displayed on a display telephone that is assigned to ring upon
access to a Doorphone. This same parameter is used for the warning tone given to a
station user when off-hook, when a Doorphone is activated, and for the time interval
for which a station can answer an incoming call from a Doorphone (if the Doorphone
is programmed for automatic call answer).
•
Enter system programming mode
•
Press Line Key 1
•
Dial
0 7
•
Enter value
o
0 - 10 sec(*)
o
1 - 30 sec
o
2 - 60 sec
o
3 - 90 sec
•
Press
MIC
to store the data
•
Press
SPKR
to go back on line
Note: (*) indicates default value
1-08 : Ring Transfer Recall Time
This Memory Block area is used to enter the time for the Recall to occur at the Key
Telephone that ring transferred a call, if the transferred call was not answered within
the preprogrammed time interval.
•
Enter system programming mode
•
Press Line Key 1
•
Dial
0 8
18