English-35
English-34
Setup Menu
According to various requirements
in different source modes, certain
features could be hidden (disabled)
on the menu.
Setup
HDMI 1
Input Labels
Key Lock
IR Lock Setting
Menu Language
MOVE
SELECT
RETURN
EXIT
HDMI CEC
Energy Options
No Signal Menu
Sleep Timer
Auto Power Down
English
Español
日本語
中文
Deutsch
Русский
Italiano
Čeština
Français
Setup
USB2 Standby Power
RGB Options
Input Detection
HDMI Signal Option
System Info
Reset AV & Setup
Reset all settings to the factory
values.
No
MOVE
SELECT
RETURN
EXIT
Yes
HDMI 1
1.
Menu Language
Select the menu display language.
English / Español/ Français /
日
本語
/
中文
/ Deutsch / Русский /
Italiano / Čeština
2.
Input Labels
Switch between the labels of the
input terminal and create labels
of your choosing.
3.
Key Lock
Lock (disable) the power button
on the display.
On
/
Off
4.
IR Lock Setting
Select
On
to lock your remote
control, and the remote control
will disable to control the display.
Press
Display
button for 5
seconds to unlock it.
5.
HDMI CEC
This function enables you to
control the HDMI CEC compliant
device connected via the HDMI
connector.
[Enable CEC]
Select
On
to enable HDMI CEC.
[Audio Receiver]
Select
On
to enable ARC (Audio
Return Channel) function.
ARC is an audio link which can
replace other cables between
the Monitor and the receiver
or speaker system. HDMI-
1 terminal can support ARC
function.
[Device List]
Show the device list.
6.
Energy Options
When RS-232C is selected for
control
Home mode / Office mode
• When there is no signal, NO
SIGNAL is displayed and
the Monitor switches to Auto
Standby mode after a fixed
period of time has passed.
• When a signal enters into
the selected input terminal,
the Monitor switches to ON
mode.
Retail mode
When there is no signal, NO
SIGNAL is displayed but the
Monitor does not switch to
an energy options mode (it
remains in ON mode).
When LAN is selected for
control
Home mode
• When there is no signal,
NO SIGNAL is displayed
and the Monitor switches to
Auto Power save mode after
a fixed period of time has
passed.
In Auto Power save mode,
if no LAN signal is received,
the Monitor switches to
Auto Standby mode after 3
minutes.
• When a signal enters into
the selected input terminal,
the Monitor switches to ON
mode.
