English-15
English-14
Place The Display On A Solid Surface
Ensure that the display is placed in
a position to allow free flow of air. Do
not cover the ventilation openings
on the back cover. Do not place the
display near any open flames. Do
not allow the display to be placed
in an environment where it can be
exposed to heat, direct sunlight, or
rain and water. Do not expose the
equipment to any liquid.
Battery Installation and Replacement
The remote control is powered by two 1.5V AAA batteries. To install or replace
batteries:
1. Open the battery cover of the remote
control by pushing and pulling it in the
direction of the arrow.
2. Insert two new “AAA” size batteries
for the remote control. When
replacing old batteries, push them
towards the springs and lift them out.
3. Match the batteries to the (+) and (-)
marks in the battery compartment.
4. Insert the bottom of the battery, the
(-) side, into the battery compartment
first, push towards the springs and
insert the top of the battery, the (+)
side, into place. Do not force the
battery into the battery compartment.
5. Close the battery cover making sure the tabs rest in the corresponding
holes and push down the cover until it clicks shut.
Min
1 m