NEC E326 User Manual Download

Page: 38 / 50

English-37

English-36

USB Demo Mode

The Monitor could automatically play

image, music, or video files from

USB storage device with USB Demo

Mode.

HDMI 1

USB

USB Demo Mode

Off
PHOTO
MUSIC
MOVIE

MOVE

SELECT

RETURN

EXIT

Enable USB Demo Mode

RETAIL mode is set under Energy

Options in the on-screen display

menu.

USB Demo Mode becomes Enable

at RETAIL mode.
• Press

MENU

button to open OSD

menu.

• Go to USB page and select USB

Demo Mode.

• Select which file type will be

played with USB Demo Mode.

Start USB Demo Mode

Demo mode will start automatically

when:
• USB Demo Mode is turned on.

• A demo folder named with "NDS_

DEMO" is stored on USB storage

device.

• The input sources is not set to

USB.

• No OSD display on screen except

for No signal / No channel found.

• No user action more than 8

seconds.

Play files in USB Demo Mode

During demo mode:
• The

Power

Volume

and

Mute

buttons on

remote control are

functional. But all other buttons

will interrupt demo play and then

return to previous source.

• Removing USB storage device

also stops demo play.

• If the Monitor is turned off during

demo mode, it will continue demo

play when the Monitor is turned on

next time (if USB storage device is

still plugged).

Summary of Contents for E326



















































Search results

Summary of Contents for E326

Reviews:

Related manuals for E326

Brands by name

Popular brands

NEC E326, User Manual

Search results

Summary of Contents for E326

Reviews:

Related manuals for E326

Brands by name

Popular brands