1
2
C
o r d l e s s H a n d s e t
U
s e r G u i d e
C
o r d l e s s H a n d s e t
U
s e r G u i d e
3
7
1
2
5
4
B
a t t e r y
Installation and Operation
• Remove battery from box
• Charge without interruption
for 17.5 hours
• Remove cover from back of
handset
• Plug battery into slot
• Be sure clip is facing up
• Tuck battery and exposed
wires inside
• Replace cover firmly
• Insert handset into charging
slot
• LED on base unit turns red
during and after charging is
complete
• Standard nickel-cadmium
battery provides 4 hours talk
time, 40 hours standby
Maintenance
• Locate contact point on
handset and base unit
• Clean with pencil eraser or
contact cleaner
• Repeat monthly to maintain
a good charge
Note: After continuous charg-
ing, battery can fail to
charge/
discharge due to memory
effect. This is normal. To cor-
rect, operate handset until
low battery tone sounds, auto
shut-off occurs and the battery
fully discharges. Charge bat-
tery without interruption for
17.5 hours. If battery still does
not charge, replace it.
Front cover
Panel one
Back cover
Panel one
folds in
Back cover folds
over Panel one
Installation and Operation
• Remove battery from box
• Charge without interruption
for 17.5 hours
• Remove cover from back of
handset
• Plug battery into slot
• Be sure clip is facing up
• Tuck battery and exposed
wires inside
• Replace cover firmly
• Insert handset into charging
slot
• LED on base unit turns red
during and after charging is
complete
• Standard nickel-cadmium
battery provides 4 hours talk
time, 40 hours standby
Maintenance
• Locate contact point on
handset and base unit
• Clean with pencil eraser or
contact cleaner
• Repeat monthly to maintain
a good charge
Note: After continuous charg-
ing, battery can fail to
charge/
discharge due to memory
effect. This is normal. To cor-
rect, operate handset until
low battery tone sounds, auto
shut-off occurs and the battery
fully discharges. Charge bat-
tery without interruption for
17.5 hours. If battery still does
not charge, replace it.
Installation
and
Operation
• Remove battery
from box
• Charge without interrup-
tion
for 17.5 hours
• Remove cover from back of
handset
• Plug battery into slot
• Be sure clip is facing up
• Tuck battery and exposed
wires inside
• Replace cover firmly
• Insert handset into charging
slot
• LED on base unit turns red
during and after charging is
complete
• Standard nickel-cadmium
battery provides 4 hours talk
time, 40 hours standby
Maintenance
• Locate contact point on
handset and base unit
• Clean with pencil eraser or
contact cleaner
• Repeat monthly to maintain
a good charge
Note: After continuous charg-
Inside
NECC0238 USER GUIDE 7/20/00 4:42 PM Page 3
All manuals and user guides at all-guides.com
