![background image](http://html1.mh-extra.com/html/nec/dtl-12bt-1-series/dtl-12bt-1-series_user-manual_3893290049.webp)
1 - 37
Connecting a Headset
3
On the Bluetooth
®
screen, select [1. Pairing Mode] > [1. Pairing] >
[1. -- Bluetooth Headset --] in this order and select a Bluetooth
®
headset to pair with from a list of Bluetooth
®
devices located.
4
Select [1. <Paired Headset>] > [2. Connect] > [2. Enable] in the
pairing screen in this order and press the OK key.
Pairing between the Bluetooth
®
headset and the Bluetooth
®
terminal is
completed.
After pairing, be sure to configure the cradle connection with the Bluetooth
®
headset in Step 4 to enable it. If connection setting is not done, the Bluetooth
®
headset cannot be used.
Before pairing your Bluetooth
®
headset in use with the Bluetooth
®
terminal,
cancel the connection (or standby mode) with the Bluetooth
®
device in use. Then
connect the Bluetooth
®
headset to the Bluetooth
®
terminal and use it.
Do not connect the Bluetooth
®
headset that is paired with the Bluetooth
®
terminal
to other Bluetooth
®
devices. Doing so may disable operations for originating and
terminating calls.
To unpair a paired Bluetooth
®
headset
Select [1. Delete] in the Bluetooth
®
Headset screen in Step 4 above to switch to a Delete
screen. Press the OK key to unpair the paired Bluetooth
®
headset.
=2CKTKPI?
$NWGVQQVJ*GCFUGV
ĉĊ$CEM1-
Ĵ
=2CKTKPI?
ĉĊ$CEM1-
Ĵ
Ĵ
=$NWGVQQVJ*GCFUGV?
CCDDEEFFGGHH
ĉĊ$CEM1-
Ĵ
ĵ
Ĵ
Ĵ
Ĵ
Ĵ
ĵ
=$NWGVQQVJ?
2CKTKPI/QFG
8KUKDKNKV[
ĉĊ$CEM1-
Ĵ
ĵ
=2CKTKPI/QFG?
2CKTKPI
2+0%QFG
ĉĊ$CEM1-
Ĵ
ĵ
Ĵ
ĵ
It takes approximately one
minute for locating.
=2CKTKPI?
ĉĊ$CEM1-
Ĵ
Ĵ
ĵ
=$NWGVQQVJ*GCFUGV?
&GNGVG
%QPPGEV
ĉĊ$CEM1-
Ĵ
ĵ
=%QPPGEV?
&KUCDNG
'PCDNG
ĉĊ$CEM1-
Ĵ
ĵ
ĵ
Caution
T i p s