Document Revision 3
NEC Unified Solutions, Inc.
3 - 6
Installing the D
term
Cordless II
4.
Plug one end of the short telephone cord (locally supplied) in the LINE
jack on the base unit. Plug one end of the NEC digital multiline
telephone into the PHONE jack. Place the telephone cords inside the
molded channels on the bottom of the wall mount stand.
5.
Plug the other end of the short telephone cord into the modular wall jack
in the center of the wall plate.
6.
Place the base unit on the posts of the wall plate and push down until it
is firmly seated.
7.
Plug the AC adapter into a standard 120 Vac wall outlet.
Do not use an outlet controlled by a wall switch.
Figure 3-7 Placing the Base Unit on the Posts of the Wall Plate