![background image](http://html.mh-extra.com/html/nec/dterm-cordless-ii/dterm-cordless-ii_user-manual_248431007.webp)
6
Programming Desk/Cordless Softkey Switching (Redial key)
This feature switches from Desk to Cordless mode only.
1.
Make sure the base unit is in Desk mode.
2.
Remove the battery.
3.
Press and hold the
4
and
#
keys on the handset at the same time.
4.
Install the battery while pressing and holding these keys.
5.
After the handset beeps one time, release the keys.
>
At this point the handset is in the setup mode.
6.
Press
HOLD
to display the current mode. Digital (Redial)
7.
Press
F2
and then
HOLD
.
>
The handset displays Digital (F8). This changes the program of the
REDIAL
key to the
Desk/Cordless Softkey Switching mode. Redial functionality is no longer available.
8.
Press
TALK
once to restore the handset to standby mode.
9.
To test this feature, press
REDIAL
once.
>
The base unit automatically changes from Desk to Cordless. This is a one time
switching operation only.
>
If necessary,
F1-F4
can be programmed for redial function.
10.
The
REDIAL
key can be restored for redial function only by entering setup mode, pressing
F3
and then
HOLD
.
>
The handset displays Digital (Redial). This means that the
REDIAL
key has been
restored for redial function only.
11.
Press
TALK
once to restore the handset to standby mode.
Changing Channels
During the conversation if the user presses
CHAN
, the ‘TALK’ icon starts blinking. The ‘TALK’ icon
stops blinking when handset completes channel change.
>
During channel change, other telephone functions are not available.
Summary of Contents for Dterm Cordless II
Page 1: ...User s Guide Dterm Cordless II ...
Page 11: ...10 Notes ...