2
Connecting the Base Unit
1.
Connect the telephone line cord to the “TEL LINE” jack on the base unit and to a telephone
outlet.
2.
Connect the AC adapter to the DC IN 9V jack and to a standard 120 V AC wall outlet.
3.
Set the base unit on a desk or tabletop and place the handset on the base unit.
4.
Raise the antenna to a vertical position.
USING YOUR PHONE
Handset On Base
Handset Off Base
Answer Call
Remove the handset from the base,
(AutoTalk) or press
talk
.
Pick up the handset and press
talk
.
Make Call
1
Remove the handset from the base,
(AutoTalk) or press
talk
.
1
Press
talk
.
2 The
talk/battery low
LED lights.
2 The
talk/battery low
LED lights.
3 Listen for the dial tone.
3 Listen for the dial tone.
4 Dial the number.
4 Dial the number.
Hang Up
Return the handset to the base,
(AutoStandby) or press
talk
.
Press
talk
.
Redial
1
Remove the handset from the base,
(AutoTalk) or press
talk
.
1
Pick up the handset and press
talk
.
2 Listen for the dial tone.
2 Listen for the dial tone.
3 Press redial to dial the last number dialed.
3 Press redial to dial the last number dialed.
Before plugging the telephone line into your new telephone, the rechargeable
nickel-cadmium battery pack must be fully charged. Charge the battery for
approximately 15 to 20 hours without interruption.