NEC DT900 Series, User Manual

Page: 86 / 214

C A L L T R A N S F E R R I N G A N D C O N F E R E N C I N G
6-66
DT900/DT900S Series Phone User Guide
2
Enter the phone number you want to call.
3
Press the Dial softkey to initiate the call, or wait a few seconds for the call to be
automatically dialed.
The call proceeds to the dialed party.
4
When you have completed the call, press the EndCall softkey or press the switch hook
to end the call and return to your original call.
5
Press the Hold key or the Resume softkey to resume the original call.
C O N C U R R E N T C A L L S H U T T L E
To switch between calls
Using the Shuttle softkey, you can switch between two concurrent calls.
•
Press the Shuttle softkey to switch between the calls.
•
Press the Shuttle softkey again to switch back to the other call.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C A L L T R A N S F E R R I N G A N D C O N F E R E N C I N G
C O N F E R E N C I N G C A L L S
The phones support 3 party conferencing.
Conference Reminder Tone
A Conference Reminder tone may be enabled on your phone. If enabled, a reminder
tone is played periodically when you have established a 3-party conference call from
your telephone. You may also hear the phone if you a called party on another 3-party
conference that was established from another phone enabled for the conference
reminder tone.
To conference two calls
1
While on a call, press the Conf key, or press the Conf or Conference softkey.
2
Use the key pad to dial the telephone number of the party to be joined in the conference.
3
Press the Dial softkey to initiate the call, or wait a few seconds for the call to be
automatically dialed.
a.
If you decide not to complete the conference, the new call can be terminated by
pressing the EndCall softkey.
4
Press the Conf key, or press the Conference softkey after the other party has answered
their phone to complete the conference.