NEC DT750 User Manual Download Page 89

Page: 89 / 191

TO REGISTER NAME ON ONE-
TOUCH SPEED CALLING KEY

Press

NAME

soft key.

Press a desired

One-Touch Speed Calling

key.

Enter desired name on the keypad. Display indi-
cates the name entered.

Press >>> soft key twice to display the following
soft keys.

Press

SET

soft key to save the entered name.

Name information displayed on the

One-Touch

Speed Calling

key changes as follows:

Note:

For the key to which no name information is reg-
istered, the character "SPD" will be displayed.

1:25 PM TUE 18 MAR 2008

NAME >>>

Push Speed Calling Key

SPD

←

→

BK >>>

←

→

BK >>>

NEC BNET

Note:

To delete the entry, press DEL or BK key and
delete each one character.

Note:

To delete the whole setting, press CLEAR key
and back to idle status.

NEC BNET

>>>

CLEAR

CANCEL

SET

1:25 PM TUE 18 MAR 2008

NAME >>>

NEC BNET

Summary of Contents for DT750
































































































































































































Search results

Summary of Contents for DT750

Reviews:

Related manuals for DT750

Brands by name

Popular brands

NEC DT750, User Manual

Search results

Summary of Contents for DT750

Reviews:

Related manuals for DT750

Brands by name

Popular brands