NEC DT 2000 Owner'S Manual Download Page 68

Page: 68 / 90

-60-

PERIODIC MESSAGE NOTIFICATION

Your DT2000 cellular phone continually monitors for any
unread messages you may have received and will provide
user notification as follows:

EMERGENCY MESSAGES

Your cellular phone scans for any unread emergency
messages every 30 seconds and if any are found the
following screen will be displayed:

NOTE: Pressing MEM key allows you to go to the
message view mode and the incoming message will be
displayed on the screen.

URGENT MESSAGES

Your cellular phone scans for any unread urgent
messages every 10 minutes and if any are found the
following screen will be displayed:

NOTE: Pressing MEM key allows you to go to the
message view mode and the incoming message will be
displayed on the screen.

NOTE: There will be no periodic message notification for
normal, bulk or voice mail messages.

MESSAGE VIEW MODE

The Message View Mode allows you to view the incoming
messages When this mode is entered, the display will show
the first message received in the order received.

xxx Unread
EMERGENCY
Messages
Press MEM

xxx Unread
URGENT
Messages
Press MEM

Entering
Message
View
Mode

Summary of Contents for DT 2000



























































































Search results

Summary of Contents for DT 2000

Reviews:

Related manuals for DT 2000

Brands by name

Popular brands

NEC DT 2000, Owner'S Manual

Search results

Summary of Contents for DT 2000

Reviews:

Related manuals for DT 2000

Brands by name

Popular brands