NEC DSX PROGRAMMERS -, Reference, Page: 6 / 72

Telephone Programming
2
◆
Telephone Programming DSX Programmer’s Quick Reference
Navigating through Telephone Programming
Use the following guidelines when using the DSX telephone programming.
Navigation (Line 1)
Use this line to select the program, option, port, extension, or table you want to customize. After entering the
programming mode and selecting a program (e.g. 2104-01),
Navigation (line 1) shows:
• The program (
2104
) and option number (
01
).
• The port’s extension number - if any ( Ext-300 )
• The station, line, COS, or table number (
Sta-001
).
Navigation
(Line 1)
[ ] = Soft Key
To advance to the option line (for editing data):
1.
While the option is fl ashing (e.g., 01 in the above example), press HOLD twice.
• Pressing
Volume
up and
Volume
down will scroll through the options for the selected port.
To select another extension and advance to the option line (for entering data):
1. While the option is fl ashing (e.g., 01 in the above example), press HOLD + Enter extension HOLD .
To navigate by extension or station instead of option:
1.
While the option is fl ashing (e.g., 01 in the above example), press
[>>]
or TRANSFER .
• Select either the extension number or station port.
2.
Press
Volume Up
and
Volume Down
to scroll through the same option for stations or extensions, depending on
which you selected.
3. Press
[Select]
or HOLD to advance (drill down to) the option.
Key Options
HOLD
or
[Select]
Advance (drill down to) Options .
SPEAKER
Sequentially back up (and out) of programming.
•
SPEAKER
normally fl ashes green. In the data entry mode it fl ashes red.
[Back]
Sequentially back up (and out) of programming.
22- and 34-Button Keyset
Super Display Keyset
Navigation
Option
Soft Keys
Flashing
Cursor