NEC DS1000 Release Notes Download | Manualshive

Page: 18 / 74

background image

DS1000 02.10.09 Release Notes

New Features in 02.10.09

10

◆

02.10.09

DS1000 Release Notes

2.

Press

NONE

.

OR
Dial

0

.

OR
Press

CLEAR

.

3.

Off Premise Call Forwarding is cancelled.

Dial Tone Detection

Feature Available

The system can optionally detect precise CO dial tone for automatically dialed trunk calls (such as
Speed Dial and Auto Redial calls). With Dial Tone Detection enabled for a trunk, the system will
monitor the trunk when initially seized for valid dial tone or stutter dial tone. If valid EIA/TIA dial
tone is detected, the system outdials the call on the trunk. If dial tone is not detected within 2 sec-
onds, the system will try the next available trunk in the same trunk group to which the initial trunk
belongs. If another trunk in the group is not available, the user hears busy tone.

If Dial Tone Detection is disabled, the system waits 500mS after trunk seizure and then outdials the
number.

If enabled, Dial Tone Detection applies to the following types of trunk calls:

●

Auto Redial (initial trunk seizure)

●

Caller ID (callbacks)

●

Last Number Redial

●

Call Forwarding Off Premise

●

Save

●

Speed Dial

Dial Tone Detection does not apply to manually dialed trunk calls.

1001-Dialtone Detection

Use this option to enable (Y) or disable (N) Dial Tone Detection for the trunk. The default setting
for this option is disabled (N).

Extension Locking

Feature Available

Use Extension Locking to secure your phone when you leave your office. You may want to do this
if your phone has Toll Restriction and Class of Service options enabled that could be easily abused.
While locked, the restrictions set up in Class of Service 15 and Toll Level 7 are in force at your
extension. When you return, just unlock your extension to return it to normal operation.

You’ll need to program the restrictions in Class of Service 15 and Toll Level 7 separately. See the
Class of Service and Toll Restriction features for more.

Note: Walking Class of Service overrides Extension Locking. For example:

●

Extension 301 is permitted by their Class of Service and Toll Restriction to use Paging and
place long distance calls.

●

Extension 306 locks their extension. While locked, Class of Service 15 prevents Paging and Toll

«
...
16
17
18
19
20
...
»

Summary of Contents for DS1000











































































Reviews:

No comments

Related manuals for DS1000

Brand: NEC Pages: 10

Brand: NEC Pages: 27

Brand: Samsung Pages: 128

Brand: Samsung Pages: 33

Brand: Samsung Pages: 2

Brand: Jabra Pages: 16

SP200 - QUICKSTART GUIDE 1

Brand: Jabra Pages: 372

JABRA FREEWAY HFS100

Brand: Jabra Pages: 40

Brand: Jabra Pages: 3

STARPLUS Triad-S 1

Brand: Vodavi Pages: 19

980590-0403 - Cordless Internet Handset USB VoIP Wireless Phone

Brand: Logitech Pages: 2

Brand: LEGRAND Pages: 3

Brand: AGFEO Pages: 84

Brand: QBest Pages: 17

Professional C4230

Brand: Clarity Pages: 2

AdvanceCommunicator

Brand: AdvanceTec Pages: 30

Brand: AEG Pages: 125

Brand: Samsung Pages: 12

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands