NEC DS1-MP10RX2, Important Information Manual

Page: 20 / 204

ENG-10
NETWORK INFORMATION
Display the information when this device is wirelessly connected to the network.
WIRELESS LAN SETTING
Configure the settings for wirelessly connecting this device to the network.
Item Description Remarks
PROFILE - SIMPLE ACCESS POINT
Set this device as a simple access point for con-
necting to a computer or a smart phone.
- SMART CONNECTION
Easily connect to a computer or a smart phone
utilizing the application software, MultiPresenter ,
installed on them.
- INFRASTRUCTURE
Connect this device to an access point.
- The default factory setting is [ SMART
CONNECTION ].
- If either [ SIMPLE ACCESS POINT ] or
[ SMART CONNECTION ] has been set
up, the IP address for this device is
“192.168.120.1” and the subnet mask
is “255.255.255.0”.
Note: Number of device that can be simul-
taneously connected under
SIMPLE ACCESS
POINT or SMART CONNECTION is up to
twelve units.
Recommendable number of device for si-
multaneous connection is up to eight units
for normal operation.
DHCP/
IP ADDRESS /
SUBNET MASK /
GATEWAY
Set these when [ INFRASTRUCTURE ] is selected for
[ PROFILE ].
DETAIL SETTINGS The configuration items are differed in each profile
option. Refer to the following table.
RECONNECT Attempt connecting to the network. Select this after
changing the configuration.
DETAIL SETTINGS ( SIMPLE ACCESS POINT )
Item Description Remarks
SECURITY SETTING Select the security type (WPA2-PSK). - The default factory setting is [ DIS-
ABLED ].
- WPA2-PSK consists of 8 to 63 alphanu-
meric characters.
SSID Set the SSID. - The default factory setting is produc-
tion serial number.
- Consists of 1 to 32 alphanumeric char-
acters.
CHANNEL Select a wireless channel. - The default factory setting is “6”.