Section 5 Disassembly and Reassembly 5-7
Figure 5-6 The 3 1/2-Inch Device Screws
4.
Slide the 3 1/2-inch hard disk drive towards the back of the system unit until it is
free of the molded plastic.
Optional 3 1/2-Inch Hard Disk Drive Removal
Remove the optional 3 1/2-inch hard disk drive as follows.
1.
Remove the system access cover and front panel as previously described.
2.
Unplug the hard disk drive power and signal cables from the optional hard disk
drive.
3.
Locate the two screws securing the 3 1/2-inch hard disk drive in the molded
plastic cage at the front of the system. Remove the screws.
Summary of Contents for Direction SP200T
Page 8: ...Contents ix ...