manualshive.com logo in svg

NEC Digital Talk 2000, Owner'S Manual, Page: 72 / 90

Share
Download
NEC Digital Talk 2000 Owner'S Manual Download Page 72

DELETING MESSAGES

UNLOCKED MESSAGES

When you want to delete an unlocked message from the
Short Messaging System, you must first be in the Message
View Mode. After entering the Message View Mode, select the
message you wish to delete. Press the CLR key. The display
will indicate:

If yes is selected the message will be deleted from memory.  If
you select no the message deleting sequence will be aborted.

LOCKED MESSAGES

If the message you want to delete is locked, an alarm tone will
sound and the display will indicate:

CALLBACK  FEATURE

If a received message being viewed on the screen has only
one callback number attached to the message, a callback to
that number can be initiated by pressing the SND key. When
the SND key is pressed, the message view mode is exited
and a call orgination occurs to that callback number listed in
the message.

-64-

DELETE
MESSAGE?
1. yes
2. no

CAN'T
DELETE,
MESSAGE
LOCKED

2141234567
Home

Summary of Contents for Digital Talk 2000



























































































Reviews:

No comments