Using CD-RW and SoftDVD Software 9
Displaying Movies on a Television Set
Note
This section applies to systems that have a TV Out connector and support the
connection of a television set.
If you connect a television set to your system to watch a movie on it instead of on your system’s
LCD screen, set TV Out to Primary in the Windows Display Properties window.
To configure the television set as the primary display, follow these steps:
1.
Connect the video cable from your television to the TV Out connector on your system.
Some systems require an optional TV Out cable adapter that plugs into the TV Out
connector on the system. Carefully align the pins on the cable adapter (arrow facing up)
with the connector before plugging it in. Connect your TV’s video cable to the other end of
the adapter.
2.
Right click the Windows desktop and click
Properties
. The Display Properties window
appears.
3.
Click the Settings tab and click the Advanced button. Click the Displays tab.
4.
Select the Television display field. Click the Primary button. Click
OK
twice.
Optimizing Microsoft Windows 98 Second Edition
For optimal performance of the NEC SoftDVD Player on NEC systems with the Microsoft
Windows 98 Second Edition operating system, check that the DVD-ROM drive DMA setting is
enabled.
1.
On the Windows desktop, right click My Computer and click
Properties
.
2.
At the System Properties window, click the Device Manager tab.
3.
At the Device Manager window, double click the CD ROM icon and double click the
DVD-ROM drive icon.
4.
Click the Settings tab. If there is no check mark in the DMA box, click on the box to enable
the setting.
5.
Click
OK
in the Settings window. Click
OK
in the System Properties window.
Uninstalling the NEC SoftDVD Player
If you ever need to uninstall the NEC SoftDVD Player from your system, proceed as follows.
1.
On the Windows desktop, click
Start
, point to Settings and Control Panel, and click
Control
Panel
.
2.
Double click
Add/Remove Programs
.
3.
Double click
Jet-Audio
in the Add/Remove Programs window and follow the prompts.
In addition to uninstalling the NEC SoftDVD Player, you need to reset your Audio CD settings
from Jet-Audio Player to Windows CD Player.
For Windows 2000, change the settings as follows.
1.
On the Windows desktop, double-click
My Computer
.
2.
Click
Tools
, click
Folder Options
, and select
File Types
tab.