Programming
26-02 : Dial Analysis Table for ARS/LCR
Networking
◆
191
26-02 : Dial Analysis Table for ARS/LCR
Description
Use
Program 26-02 : Dial Analysis Table for ARS/LCR
to set pre-transaction tables for selecting
Automatic Route Selection (ARS).
●
Service Type 1 (Route to Trunk Group Number) - The number routes to a trunk group.
●
Service Type 2 (F-Route Selected) - The number is controlled by the F-Route table.
Input Data
Level:
Aspire S
Aspire M/L/XL
IN
•
Available.
•
Available.
•
Dial Analysis Tables increased from 200 to
400 with software 2.63+.
•
Dial Analysis Tables increased from 200 to
400 with software 2.63+.
Dial Analysis Table Number
1-400
Item No.
Item
Input Data
Default
01
Dial
Dial Digits (16 digits maximum)
1-9, 0, *, #, or
@
for wild character
(Press line key 1)
No Setting
02
Service Type
0 = No ARS
1 = Route to Trunk Group
2 = Select F-Route Access
0
03
Additional Data / Service
Number
In Service Type 1: Select Trunk
Group Number (0-100, 0=no route)
In Service Type 2:
F-Route Time Schedule Not Used =
0-500 (F-Route Table Number).
Refer to Program 44-05.
F-Route Time Schedule Used =
0-500 (F-Route Selection Number).
Refer to Program 44-04.
0
04
ARS Class of Service
0-16
10
05
Dial Treatment
0-15
0
Summary of Contents for Aspire Series
