Section 7: Specifications and Parts List
Aspire S Hardware Manual
Section 7: Speci
fi
cations and Parts List
◆
7-3
7
Environmental Requirements
Meeting established environmental standards maximizes the life of the system. Refer to the Standard
Practices Manual for further information. Be sure that the site is not:
1. In direct sunlight or in hot, cold or humid places.
2. In dusty areas or in areas where sulfuric gases are produced.
3. In places where shocks or vibrations are frequent or strong.
4. In places where water or other
fl
uids comes in contact with the main equipment.
5. In areas near high-frequency machines or electric welders.
6. Near computers, telexes, microwaves, air conditioners, etc.
7. Near radio antennas (including shortwave).
Environmental Speci
fi
cations
Cabinets, PCBs and Key Telephones
Temperature: 0
o
C - 40
o
C (32 - 104
o
F)
Humidity: 10-90% RH
Door Box
Temperature: -20
o
C - 60
o
C (-4 - 140
o
F)
Humidity: 20-80% (non-condensing)
Power Supply
Operating:
Temperature: 0
o
C - 60
o
C (32 - 140
o
F)
Humidity: 10-90% RH
Storage:
Temperature: -20
o
C - 75
o
C (-4 - 167
o
F)
Humidity: 10-95% RH
Power Requirements
A dedicated 110 VAC 60 Hz circuit located within seven feet of the cabinet is required. You should
install a separate dedicated outlet for each cabinet.
Caution
Double Pole/Neutral Fusing
(power supply fuses located at both the L and N side)
Site Requirements
The system can be
fl
oor-, wall- or rack-mounted.
